Dsc 5132 programming manual

See your system Installation Manual, for more information on each of the above programming sections. Enable PC Supervision The control panel will supervise the PC receiver via the Keybus after at least one device has been enrolled on the module (see section “Enrolling Wireless Devices”). the back of this manual. 6. Continue with steps 3 - 5 until you have enrolled all devices. 7. To exit press [#]. Once you have enrolled all the AML devices, you should program the Panel Key. See section for more information. Zone Programming The AML devices will not work properly until you complete the zone and partition programming. DSC (Digital Security Controls) is a world leader in electronic security. Since the company’s genesis, the experts at DSC have been leading the way. From our revolutionary control panels, to our industry-leading IP alarm monitoring products and now to our sleek, contemporary self-contained wireless panels, DSC has always been front and center.

See your system Installation Manual, for more information on each of the above programming sections. Enable PC Supervision The control panel will supervise the PC receiver via the Keybus after at least one device has been enrolled on the module (see section “Enrolling Wireless Devices”). Manual PCRS Version features of v for WARNING: This manual contains information on limitations regarding product use and function and information on the limitations as to liability of the manufacturer. The entire manual should be carefully read. assigned slot number in the programming worksheets in the back of this manual. 6. Repeat steps 3 - 5 until all wireless keys have been enrolled. 7. (PC only) By (PC only) default, all wireless keys are assigned to Partition 1. To assign keys to Partition 2, enable the appropriate options in programming sections [91] and [92].

DSC recommends that additional smoke alarms beyond those required for minimum protection This manual provides installation and programming information. which can be obtained from your local dealer or downloaded from the DSC web site at Refer to the T-Link TL/ Installation Manual for details. The. RF is supervised as a PC To activate module supervision, after you enroll the first device(s). 1. Exit and then re-enter Installer.